Livingston Parish30 min from Baton Rouge
Seamless gutters in Walker, Louisiana
Seamless 6" K-style for Walker and the Livingston Parish acreage around it — houses, workshops and metal buildings, all off the same rate card.
- 5.0 on Google · 20 reviews
- Licensed & insured
- 5-year workmanship warranty, in writing
- Walker, LA 70785
Walker is thirty minutes out along I-12, and the lots get bigger the further you go from the interstate. A lot of what we hang here isn't only the house: it is the house plus the shop, the pole barn or the equipment building behind it, which is work that suits a mobile brake because the coil comes to the property rather than the property waiting on a shop order.
Metal roofing is far more common on this side of Livingston Parish than it is in town, and it changes the calculation. Water leaves a metal panel faster and with more momentum than it leaves asphalt shingle, so a trough that is undersized or set too low gets overshot entirely in a hard rain. That is one of the practical reasons we hang 6-inch and nothing smaller.
Where we work in Walker
- Satsuma
- Colyell
- Lockhart Road
- Highway 447
- Milton
- Juban Road
- Walker North
Somewhere not on this list? It is a list of the places people name, not a boundary. Check the full coverage map or call and ask.
Walker specifics
What is different about guttering here.
Three things that change the job in Walker rather than anywhere else on the map — worth knowing before you compare quotes.
Metal roofs overshoot small gutter
Standing-seam and R-panel shed water fast. Combine that with a steep pitch and a 5-inch trough set for shingle, and a downpour goes straight over the front lip while the gutter stays half empty. 6" K-style carries roughly forty per cent more water than the 5" most builders default to, which is the headroom that keeps a metal-roofed Walker shop from watering its own slab.
Shops and barns are cheap gutter
Long straight eaves with almost no direction changes are the least expensive footage we hang — the linear-foot rate does the arithmetic and there are few miters at $45 to add on top. If you are getting the house done, price the shop in the same visit: the $500 job minimum applies per job, so two separate trips can cost more than one bigger one.
Acreage drainage, not subdivision drainage
On a lot with room on it, a downspout can genuinely get water away from the structure instead of just moving it four feet. We place outlets with the lie of the land in mind, one per fifty feet of gutter, and flush and flow-test each one before we pull out. On the wooded lots toward Colyell, guard at $9 a foot is worth pricing at the same time.
What we do here
Everything we hang in Walker.
One profile — 6" K-style seamless — on every house and every building, residential or commercial. That is why there is one rate card rather than a quote that depends on what is on the truck.
Seamless Gutter Installation in Walker
6" K-style, rolled on site to the exact length of your roofline.
Downspouts in Walker
One every 50 feet, placed where the water needs to leave.
Leaf Guard in Walker
$9 per foot installed, over new gutter or what you already have.
Gutter & Roof Cleaning in Walker
$250 flat — hand-cleared, bagged, hauled off and flow-tested.
What it costs
The same published rates in Walker.
No zone pricing, no travel charge, no number invented in the driveway. These are exact rates rather than ranges — what moves the total is the count of feet, miters and end caps, never the rate.
| Item | Rate |
|---|---|
| 6" K-style seamless aluminum — under 15 ft | $14/ft |
| Seamless gutter — over 15 ft | $23/ft |
| Seamless gutter — second story | $25/ft |
| Seamless gutter — over 30 ft | $25/ft + $500 manlift |
| Downspouts — one per 50 ft of gutter | $150 / $220 each |
| Miters — any corner or angle | $45 each |
| End caps — wherever a run stops | $10 each |
| Leaf guard, installed | $9/ft |
| Gutter & roof cleaning — flat rate | $250 |
Every job except a cleaning bills at least $500. Prices shown here are estimates, not quotes — the written estimate confirms the counts after we have measured.
Walker questions
Asked on Walker estimates.
If yours isn't here, call and ask. You'll get an actual answer from the person who would do the work, not a callback from a sales team.
Yes — same 6" K-style profile and the same rate card as a house. Long straight runs are efficient work: it is feet at the rate for that eave height, one downspout every fifty feet, and few enough corners that the miters barely register. The one thing we check is what the trough is fastening to, because a metal building's trim detail is not a wood fascia board and the hanger has to land somewhere solid.
That is the sensible way to do it. Both get measured at the same estimate and both appear as separate itemised sections on one written price, so you can see what each is costing and drop one if the budget says so. It also avoids paying the $500 job minimum twice, which is what happens if you book them as two jobs months apart.
Walker, Livingston and Springfield are all on the coverage map, and Denham Springs and Watson are closer still. Fifty miles from Baton Rouge is the working radius. If you are out past that, call anyway — we would rather tell you no on the phone than have you wait on a form nobody answers.
Next town over
We work either side of Walker, too.
Free estimate
Free estimate in Walker.
We'll come measure, check the fascia, look at where the water needs to go, and leave you with an itemized written price. No pressure, no financing pitch, no same-day discount that expires when we pull out of the driveway.
- Call or text
- (318) 719-5449
- Based in
- Baton Rouge, LA 70816Mobile service across 16 towns
- Hours
- Monday7:00 AM – 6:00 PMTuesday7:00 AM – 6:00 PMWednesday7:00 AM – 6:00 PMThursday7:00 AM – 6:00 PMFriday7:00 AM – 6:00 PMSaturday8:00 AM – 2:00 PMSundayClosed